ZT_FJ_SJCJ/WCS.Entity.Protocol/Station/StationEnum.cs

using System;
using System.ComponentModel;

namespace WCS.Entity.Protocol.Station
{
    /// <summary>
    ///     输送机模式
    /// </summary>
    public enum StationMode : short
    {
        /// <summary>
        ///     自动
        /// </summary>
        [Description("自动")] Automatic = 1,

        /// <summary>
        ///     手动
        /// </summary>
        [Description("手动")] Manual = 2,

        /// <summary>
        ///     维修
        /// </summary>
        [Description("维修")] Repair = 3
    }

    /// <summary>
    ///     输送机警报
    /// </summary>
    [Flags]
    public enum StationAlarm : short
    {
    }

    /// <summary>
    ///     输送机状态
    /// </summary>
    [Flags]
    public enum StationStatus : short
    {
        /// <summary>
        ///     自动
        /// </summary>
        [Description("自动")] Auto = 1 << 0,

        /// <summary>
        ///     选中状态位
        /// </summary>
        [Description("选中状态位")] Choice_Bit = 1 << 1,

        /// <summary>
        ///     任务有货
        /// </summary>
        [Description("任务有货")] OT_Status = 1 << 2,

        /// <summary>
        ///     光电有货
        /// </summary>
        [Description("光电有货")] PH_Status = 1 << 3,

        /// <summary>
        ///     运行状态位
        /// </summary>
        [Description("运行状态位")] Run = 1 << 4,

        /// <summary>
        ///     正转
        /// </summary>
        [Description("正转")] Fwd_1 = 1 << 5,

        /// <summary>
        ///     反转
        /// </summary>
        [Description("反转")] Rev_1 = 1 << 6,

        /// <summary>
        ///     上升/右转/伸出（顶升移栽升降、拆码盘机升降、提升机升降、拆码盘机拨叉伸出）
        /// </summary>
        [Description("上升/右转/伸出（顶升移栽升降、拆码盘机升降、提升机升降、拆码盘机拨叉伸出）")]
        Up_Right_Front_2 = 1 << 7,

        /// <summary>
        ///     下降/左转/缩回（顶升移栽升降、拆码盘机升降、提升机升降、拆码盘机拨叉缩回）
        /// </summary>
        [Description("下降/左转/缩回（顶升移栽升降、拆码盘机升降、提升机升降、拆码盘机拨叉缩回）")]
        Down_Left_Back_2 = 1 << 8,

        /// <summary>
        ///     高位（顶升移栽升降、拆码盘机升降、提升机升降）
        /// </summary>
        [Description("高位（顶升移栽升降、拆码盘机升降、提升机升降）")]
        High_Station_2 = 1 << 9,

        /// <summary>
        ///     中位（拆码盘机升降）
        /// </summary>
        [Description("中位（拆码盘机升降）")] Mid_Station_2 = 1 << 10,

        /// <summary>
        ///     低位（顶升移栽升降、拆码盘机升降、提升机升降）
        /// </summary>
        [Description("低位（顶升移栽升降、拆码盘机升降、提升机升降）")]
        Low_Station_2 = 1 << 11,

        /// <summary>
        ///     前位（拆码盘机拨叉伸出）
        /// </summary>
        [Description("前位（拆码盘机拨叉伸出）")] Front_Station_2 = 1 << 12,

        /// <summary>
        ///     后位（拆码盘机拨叉缩回）
        /// </summary>
        [Description("后位（拆码盘机拨叉缩回）")] Back_Station_2 = 1 << 13,

        /// <summary>
        ///     手动入库
        /// </summary>
        [Description("手动入库")] ManualStorage = 1 << 14,

        /// <summary>
        ///     上位机未分配任务
        /// </summary>
        [Description("上位机未分配任务")] UnassignedTask = -1 << 15
    }

    /// <summary>
    ///     输送机状态
    /// </summary>
    [Flags]
    public enum StationStatus1 : short
    {
        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] RES1 = 1 << 0,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] RES2 = 1 << 1,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] RES3 = 1 << 2,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] RES4 = 1 << 3,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] RES5 = 1 << 4,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] RES6 = 1 << 5,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] RES7 = 1 << 6,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] RES8 = 1 << 7,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] RES9 = 1 << 8,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] RES10 = 1 << 9,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] RES11 = 1 << 10,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] RES12 = 1 << 11,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] RES13 = 1 << 12,

        /// <summary>
        ///     拆盘机光电
        /// </summary>
        [Description("拆盘机光电")] RES14 = 1 << 13,

        /// <summary>
        ///     是否锁定
        /// </summary>
        [Description("是否锁定")] RES15 = 1 << 14,

        /// <summary>
        ///     是否锁定
        /// </summary>
        [Description("备用")] IsLock = -1 << 15
    }

    /// <summary>
    ///     外形故障
    /// </summary>
    [Flags]
    public enum StationShapeAlarm : short
    {
        /// <summary>
        ///     外形/条码等货物故障
        /// </summary>
        [Description("外形/条码等货物故障")] GoodsErr = 1 << 0,

        /// <summary>
        ///     前超长故障
        /// </summary>
        [Description("前超长故障")] FOutside = 1 << 1,

        /// <summary>
        ///     后超长故障
        /// </summary>
        [Description("后超长故障")] BOutside = 1 << 2,

        /// <summary>
        ///     左超宽故障
        /// </summary>
        [Description("左超宽故障")] LOutside = 1 << 3,

        /// <summary>
        ///     右超宽故障
        /// </summary>
        [Description("右超宽故障")] ROutside = 1 << 4,

        /// <summary>
        ///     超高故障
        /// </summary>
        [Description("超高故障")] HOutside = 1 << 5,

        /// <summary>
        ///     条码读取失败
        /// </summary>
        [Description("条码读取失败")] BcrNoread = 1 << 6,

        /// <summary>
        ///     超重
        /// </summary>
        [Description("超重")] Overload = 1 << 7,

        /// <summary>
        ///     货物严重外检故障
        /// </summary>
        [Description("货物严重外检故障")] GoodsErr1 = 1 << 8,

        /// <summary>
        ///     二维条码未读出
        /// </summary>
        [Description("二维条码未读出")] BcrNoread1 = 1 << 9,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] Res1 = 1 << 10,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] Res2 = 1 << 11,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] Res3 = 1 << 12,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] Res4 = 1 << 13,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] Res5 = 1 << 14,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] Res6 = -1 << 15
    }

    /// <summary>
    ///     站台指令
    /// </summary>
    [Flags]
    public enum StationCmd : short
    {
        /// <summary>
        ///     AGV放货通知
        /// </summary>
        [Description("备用")] Res = 1 << 0,

        /// <summary>
        ///     AGV放货运行
        /// </summary>
        [Description("备用")] Res1 = 1 << 1,

        /// <summary>
        ///     AGV放货结束
        /// </summary>
        [Description("备用")] Res2 = 1 << 2,

        /// <summary>
        ///     AGV取货通知
        /// </summary>
        [Description("备用")] Res3 = 1 << 3,

        /// <summary>
        ///     AGV取货运行
        /// </summary>
        [Description("备用")] Res4 = 1 << 4,

        /// <summary>
        ///     AGV取货结束
        /// </summary>
        [Description("备用")] Res5 = 1 << 5,

        /// <summary>
        ///     翻转信号
        /// </summary>
        [Description("翻转信号")] Res6 = 1 << 6,

        /// <summary>
        ///     机械臂取货信号，此信号上位不写入，只由PLC写入
        /// </summary>
        [Description("备用")] Res7 = 1 << 7,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] Res8 = 1 << 8,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] Res9 = 1 << 9,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] Res10 = 1 << 10,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] Res11 = 1 << 11,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] Res12 = 1 << 12,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] Res13 = 1 << 13,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] Res14 = 1 << 14,

        /// <summary>
        ///     备用
        /// </summary>
        [Description("备用")] Res15 = -1 << 15
    }

    /// <summary>
    ///     线体状态枚举
    /// </summary>
    public enum LineStatusEnum : short
    {
        /// <summary>
        ///     自动
        /// </summary>
        [Description("自动")] Automatic= 1,

        /// <summary>
        ///     报警
        /// </summary>
        [Description("报警")] Alarm = 2,

        /// <summary>
        ///     手动
        /// </summary>
        [Description("手动")] Manual = 3
    }

    /// <summary>
    ///     线体正反转枚举
    /// </summary>
    public enum FwdOrRevEnum : short
    {
        /// <summary>
        ///     空闲
        /// </summary>
        [Description("空闲")] Idle = 1,

        /// <summary>
        ///     正转
        /// </summary>
        [Description("正转")] Fwd = 2,

        /// <summary>
        ///     反转
        /// </summary>
        [Description("反转")] Rev = 3
    }
}