YG-OPP-WCS/Projects/永冠OPP/WCS.Service/Works/Station/一楼入库.cs

using DBHelper;
using Microsoft.EntityFrameworkCore;
using System;
using System.Collections.Generic;
using System.Linq;
using WCS.Core;
using WCS.Entity;
using WCS.Entity.Protocol;
using WCS.Entity.Protocol.SRM;
using WCS.Service.Extensions;
using WCS.Service.Helpers;
using WCS.Service.Log;

namespace WCS.Service.Works.Station
{
    [WorkTitle(typeof(ProductHandler), "一楼入库扫码")]
    internal class 一楼入库 : Work<StationDeviceGroup>
    {
        protected override bool SelectDevice(WCS_DEVICE dev)
        {
            return dev.CODE == "G1028";
        }

        protected override void Do(StationDeviceGroup obj)
        {
            var now = DateTime.Now;
            obj.EX(obj =>
            {
                //设备组无论单卷还是双卷都必须满足的条件
                if (obj.Items.Any(v => v.Data.VoucherNo != v.Data2.VoucherNo)) throw new WarnException($"等待任务执行--凭证号不一致");
                if (obj.Items.Any(v => v.Data3.Status.HasFlag(StationStatus.运行状态位))) throw new WarnException($"设备运行中");

                //成功创建的任务
                var finishTaskList = new List<FinishTaskList<int>>();

                //创建对应的任务
                DB.Do(db =>
                {
                    var devs = obj.GetBcrValid();
                    devs.Valid();
                    var infos = devs.GetWMSInTask();

                    foreach (var item in devs)
                    {
                        var dev = item.Station;
                        var next = dev.Entity.CODE == "1028" ? "1030" : "1031";
                        var info = infos.FirstOrDefault(v => item.FinishCode.Contains(v.ContainerCode));
                        if (db.Default.Set<WCS_TASK>().AsNoTracking().Any(v => v.BARCODE == info.ContainerCode && v.STATUS < TaskStatus.已完成 && v.TYPE == TaskType.入库))
                            throw new WarnException($"生产条码{info.ContainerCode}存在未完成任务,请检查是否为标签卡重复使用");

                        var task = new WCS_TASK();
                        task.BARCODE = info.ContainerCode;
                        task.TYPE = TaskType.入库;
                        task.STATUS = TaskStatus.执行中;
                        task.ADDRFROM = dev.Entity.CODE;
                        task.ADDRTO = info.EndPostion;
                        task.STARTTIME = DateTime.Now;
                        task.UPDATEUSER = "WCS";
                        task.UPDATETIME = DateTime.Now;
                        task.WMSTASK = int.Parse(info.WMSTaskNum);
                        task.TaskGroupKey = info.TaskGroupKey;
                        task.ADDRNEXT = next;
                        task.HEIGHT = dev.Data2.GoodsSize;

                        db.Default.Set<WCS_TASK>().Add(task);
                        finishTaskList.Add(new FinishTaskList<int>()
                        {
                            FinishCode = task.WMSTASK,
                            Station = item.Station
                        });

                        var msg = $"下达从{dev.Entity.CODE}移动至{next}的PLC指令。";
                        msg += $"[{dev.Data.Tasknum}][{dev.Data.Goodsstart}][{dev.Data.Goodsend}][{dev.Data.VoucherNo}[{dev.Data2.VoucherNo}]";
                        task.CreateStatusLog(db, msg, this.GetType());
                    }
                    //两个任务一起创建
                    db.Default.SaveChanges();
                });

                //检查对应的任务是否已创建成功
                DB.Do(db =>
                {
                    foreach (var finishTask in finishTaskList)
                    {
                        var task = db.Default.Set<WCS_TASK>().FirstOrDefault(v => v.WMSTASK == finishTask.FinishCode);
                        if (task == null) continue;

                        finishTask.Station.Data.Tasknum = task.ID;
                        finishTask.Station.Data.Goodsstart = task.ADDRFROM.ToShort();
                        finishTask.Station.Data.Goodsend = task.ADDRNEXT.ToShort();
                        finishTask.Station.Data.Goodsnum = (short)finishTaskList.Count;
                        finishTask.Station.Data.CmdType = IstationCmdType.扫码入库;
                        finishTask.Station.Data.VoucherNo++;
                    }
                    InfoLog.INFO_TIMING($"{obj.Entity.CODE}--扫码入库,耗时{(DateTime.Now - now).TotalMilliseconds}");
                });
            });
        }
    }

    [WorkTitle(typeof(ProductHandler), "一楼分配巷道")]
    internal class 巷道分配 : Work<StationDeviceGroup>
    {
        protected override bool SelectDevice(WCS_DEVICE dev)
        {
            return dev.CODE == "G1030";
        }

        protected override void Do(StationDeviceGroup obj)
        {
            obj.EX(obj =>
            {
                var code = obj.Entity.CODE;
                //两个设备都必须满足的条件
                if (obj.Items.Any(v => v.Data.VoucherNo != v.Data2.VoucherNo)) return;
                if (obj.Items.Any(v => v.Data3.Status.HasFlag(StationStatus.运行状态位))) return;

                //成功分配巷道的任务的任务
                var finishTaskList = new List<Tuple<int, StationDevice>>();

                //变更数据库信息
                DB.Do(db =>
                {
                    var devs = obj.Items.Where(v => v.Data2.Status.HasFlag(IstationStatus.光电状态) && v.Data2.Request == IstationRequest.请求分配目标地址)
                                           .Where(v => v.Data2.Tasknum > 10000 && v.Data2.Goodsend != 0);
                    if (!devs.Any()) return; //无可执行任务
                    var taskIds = devs.Select(dev => dev.Data2.Tasknum).ToList();
                    var taskList = db.Default.Set<WCS_TASK>().Where(v => taskIds.Contains(v.ID)).ToList();

                    taskList.ValidTaskCheck(devs.Count(), db);

                    var res = WMS.GetTunnelList(taskList.Select(v => v.WMSTASK.ToString()).ToList(), code);
                    if (string.IsNullOrEmpty(res.TunnelNum)) throw new WarnException($"WMS未返回巷道");
                    var tunnelNo = res.TunnelNum.Split(',').Select(v => "TY" + v).ToList();

                    var tunnels = Device.Where(v => tunnelNo.Contains(v.CODE)).ToList();

                    List<TunnelInfo> tunnelInfos = new List<TunnelInfo>();
                    foreach (var item in tunnels)
                    {
                        //当前巷道的取货点
                        var allIn = Device.Where(v => v.Is(DF.SRM二级品取货)) //一楼所有取货点
                                          .Where(v => v.ROUTES.Any(p => p.NEXT == item)) //下一个点为当前巷道的取货点
                                          .Select(v => v.CODE)
                                          .ToList();
                        var putStation = Device.Where(v => v.IsConv() && v.ROUTES.Any(p => p.NEXT != null && allIn.Contains(p.NEXT.CODE))) //下一个目标地址包含取货点的设备
                                      .Select(v => v.Create<StationDevice>()) //取所有可以到达取货点设备的信息
                                      .Where(v => !v.Data3.Status.HasFlag(StationStatus.运行状态位) && !v.Data2.Status.HasFlag(IstationStatus.光电状态) && v.Data2.Tasknum < 10000)//筛选出空闲的路径点，此处因输送机都是一个动力，因此可以先找路径点再找设备组
                                      .Distinct()
                                      .FirstOrDefault();//去一次重
                        if (putStation == null) continue;
                        var taskInStation = Device.Where(p => p.CODE.StartsWith("G") && p.DEVICEGROUP.Any(d => d.MEMBER == putStation.Entity)).OrderBy(p => p.CODE).FirstOrDefault();
                        //RGV是否有正在前往这个地址的任务
                        var rgv8 = Device.Find("RGV8").Create<RGVDevice>();
                        if (!rgv8.Data2.SystemStatus.HasFlag(WCS.Entity.Protocol.RGV.RGVRunStatus.空闲)
                          && !rgv8.Data2.WorkMode.HasFlag(WCS.Entity.Protocol.RGV.RGVMode.自动)
                          && rgv8.Data2.DestPosition_1 == taskInStation.CODE.Replace("G", "").ToShort()) continue;
                        tunnelInfos.Add(new TunnelInfo
                        {
                            Tunnel = item,
                            taskIN = taskInStation, //找到放货点设备所在组
                            SRM = Device.Where(p => p.IsSC()).FirstOrDefault(p => item.ROUTES.Any(d => d.NEXT.CODE == p.CODE)).Create<SRMDevice>()
                        });
                    }
                    //筛选出优先级最高的可用巷道
                    var tunnelInfo = tunnelInfos.Where(v => { try { return v.SRM.Data3.SCAlarm == 0 && v.SRM.Data2.SRMMode == SCMode.远程 && v.SRM.Data2.SRMStatus == SCRunStatus.空闲; } catch { return false; } })
                                                .Where(v => !db.Default.Set<WCS_TASK>().Any(p => p.Priority > 0 && p.DEVICE == v.SRM.Entity.CODE && p.STATUS < TaskStatus.堆垛机完成))
                                                .OrderBy(v => tunnelNo.IndexOf(v.Tunnel.CODE)).FirstOrDefault();
                    if (tunnelInfo == null) throw new WarnException("无可用巷道");

                    //开始变更任务信息
                    foreach (var item in devs)
                    {
                        var dev = Device.Find(item.Entity.CODE).Create<StationDevice>();
                        var task = taskList.FirstOrDefault(p => p.ID == dev.Data2.Tasknum);
                        if (task == null) throw new WarnException($"WCS无该任务{dev.Data2.Tasknum}--{dev.Entity.CODE}");

                        task.DEVICE = tunnelInfo.SRM.Entity.CODE;
                        task.TUNNEL = tunnelInfo.Tunnel.CODE;
                        task.ADDRNEXT = tunnelInfo.taskIN.CODE;
                        task.TaskGroupKey = res.WMSTaskGroupKey;
                        task.ADDRTO = task.DEVICE;
                        var msg = $"下达从G1030移动至{dev.Data.Goodsend}的PLC指令。同时将任务分配至[{ task.TUNNEL }]-[{task.DEVICE}]";
                        msg += $"[{dev.Data.Tasknum}][G1030][{dev.Data.Goodsend}][{tunnelInfo.SRM.Entity.CODE}][{dev.Data.VoucherNo}[{dev.Data2.VoucherNo}]";
                        task.CreateStatusLog(db, msg, this.GetType());
                        finishTaskList.Add(new Tuple<int, StationDevice>(task.ID, item.Entity.Create<StationDevice>()));
                    }
                    db.Default.SaveChanges();
                });

                // 开始将任务信息写入到设备
                DB.Do(db =>
                {
                    foreach (var finishTask in finishTaskList)
                    {
                        var task = db.Default.Set<WCS_TASK>().Find(finishTask.Item1);
                        if (task == null) continue;

                        finishTask.Item2.Data.Tasknum = task.ID;
                        finishTask.Item2.Data.Goodsstart = 1030;
                        finishTask.Item2.Data.Goodsend = task.ADDRNEXT.Replace("G", "").ToShort();
                        finishTask.Item2.Data.Goodsnum = (short)finishTaskList.Count;
                        finishTask.Item2.Data.CmdType = IstationCmdType.分配目标地址;
                        finishTask.Item2.Data.VoucherNo++;
                    }
                });
            });
        }
    }

    [WorkTitle(typeof(ProductHandler), "一楼RGV放货结束分配目标地址")]
    internal class 一楼RGV放货结束分配目标地址 : DeviceWork<StationDevice>
    {
        protected override void Do(StationDevice obj)
        {
            obj.EX(obj =>
            {
                var code = obj.Entity.CODE;
                obj.WhetherToExecute(IstationRequest.请求分配目标地址);

                DB.Do(db =>
                {
                    var task = db.Default.Set<WCS_TASK>().FirstOrDefault(v => v.ID == obj.Data2.Tasknum);
                    switch (task.ADDRFROM)
                    {
                        case "1028":
                            break;

                        case "1029":
                            break;

                        default:
                            break;
                    }
                    var next = obj.Entity.GetPath(task.ADDRTO);

                    task.ADDRNEXT = next.CODE;
                    db.Default.SaveChanges();
                    var msg = $"下达从{obj.Data.Goodsstart}移动至{obj.Data.Goodsend}的PLC指令";
                    msg += $"[{obj.Data.Tasknum}][{obj.Data.Goodsstart}][{obj.Data.Goodsend}][{obj.Data.VoucherNo}[{obj.Data2.VoucherNo}]";
                    task.CreateStatusLog(db, msg, this.GetType());

                    obj.Data.Tasknum = task.ID;
                    obj.Data.Goodsstart = obj.Entity.CODE.ToShort();
                    obj.Data.Goodsend = next.CODE.ToShort();
                    obj.Data.CmdType = IstationCmdType.分配目标地址;
                    obj.Data.VoucherNo++;
                });
            });
        }

        protected override bool SelectDevice(WCS_DEVICE dev)
        {
            return devCodes.Contains(dev.CODE);
        }

        private List<string> devCodes = new List<string>() {
            "1035",
            "1036",
            "1044",
            "1045",
            "1053",
            "1054",
            "1062",
            "1063",
        };
    }
}