YG-OPP-WCS/Projects/永冠OPP/WCS.Service/Works/Station/涂布出库.cs

using DBHelper;
using Newtonsoft.Json;
using System;
using System.Collections.Generic;
using System.Linq;
using WCS.Core;
using WCS.Entity;
using WCS.Entity.Protocol;
using WCS.Service.Extensions;
using WCS.Service.Handlers;

namespace WCS.Service.Works.Station
{
    /// <summary>
    /// 涂布堆垛机放货分配目标地址
    /// </summary>
    [WorkTitle(typeof(CoatingHandler), "涂布堆垛机放货分配目标地址")]
    public class 涂布堆垛机放货分配目标地址 : DeviceWork<StationDevice>
    {
        protected override void Do(StationDevice obj)
        {
            obj.EX(obj =>
            {
                obj.WhetherToExecute(IstationRequest.堆垛机放货完成请求目标地址);
                //找到当前站台为当前设备且任务为堆垛机完成的任务
                DB.Do(db =>
                {
                    var task = db.Default.Set<WCS_TASK>().FirstOrDefault(v => v.TYPE == TaskType.出库 && v.SRMSTATION == obj.Entity.CODE && v.STATUS == TaskStatus.堆垛机完成);
                    var tasks = db.Default.Set<WCS_TASK>().Where(v => v.TaskGroupKey == task.TaskGroupKey);
                    if (tasks.Any(v => v.STATUS != TaskStatus.堆垛机完成 && v.STATUS != TaskStatus.执行中))
                        throw new WarnException("任务异常，同组任务状态不为堆垛机完成或执行中");
                    if (task == null) throw new WarnException("WCS无该任务信息");
                    if (task.SRMSTATION != obj.Entity.CODE && task.STATUS != TaskStatus.堆垛机完成) throw new WarnException("任务状态不是堆垛机完成");
                    task.STATUS = TaskStatus.执行中;
                    db.Default.SaveChanges();
                    task.CreateStatusLog(db, $"状态由[{TaskStatus.堆垛机完成}]变更为[{task.STATUS}]-{obj.Entity.Code}", this.GetType());
                    //开始写入目标地址
                    obj.Data.Tasknum = task.ID;
                    obj.Data.Goodsstart = obj.Entity.CODE.ToShort();
                    obj.Data.Goodsnum = (short)tasks.Count();
                    obj.Data.Goodsend = task.ADDRNEXT.ToShort();
                    obj.Data.CmdType = IstationCmdType.堆垛机放货完成请求目标地址;
                    obj.Data.VoucherNo++;
                });
            });
        }

        protected override bool SelectDevice(WCS_DEVICE dev)
        {
            return dev.Is(DF.SRM涂布放货);
        }
    }

    /// <summary>
    /// 涂布出库分配出库口
    /// </summary>
    [WorkTitle(typeof(CoatingHandler), "涂布出库分配出库口")]
    public class 涂布出库分配出库口 : DeviceWork<StationDevice>
    {
        protected override void Do(StationDevice obj)
        {
            obj.EX(obj =>
            {
                if (!obj.Data2.Status.HasFlag(IstationStatus.光电状态)) throw new DoException("无光电");
                if (obj.Data3.Status.HasFlag(StationStatus.运行状态位)) throw new DoException("设备运行中");
                if (obj.Data.VoucherNo != obj.Data2.VoucherNo)
                    throw new WarnException($"等待任务[{obj.Data2.Tasknum}]执行--凭证号不一致[{obj.Data.VoucherNo}][{obj.Data2.VoucherNo}]");
                if (obj.Data2.Tasknum < 10000) throw new DoException("无任务");
                if (obj.Data2.Request != IstationRequest.请求分配目标地址) throw new WarnException("有任务无请求");

                DB.Do(db =>
                {
                    var task = db.Default.Set<WCS_TASK>().Find(obj.Data2.Tasknum);
                    if (task == null) throw new WarnException("WCS无该任务信息");
                    task.ADDRNEXT = "G1";
                    db.Default.SaveChanges();
                    task.CreateStatusLog(db, $"分配目标地址{task.ADDRNEXT}", this.GetType());
                    //开始写入目标地址
                    obj.Data.Tasknum = task.ID;
                    obj.Data.Goodsstart = obj.Entity.CODE.ToShort();
                    obj.Data.Goodsend = task.ADDRNEXT.Replace("G", "").ToShort();
                    obj.Data.CmdType = IstationCmdType.堆垛机放货完成请求目标地址;
                    obj.Data.GoodsSize = (short)task.Length;
                    obj.Data.VoucherNo++;
                });
            });
        }

        protected override bool SelectDevice(WCS_DEVICE dev)
        {
            return dev.Is(DF.涂布出库RGV取货站台);
        }
    }

    /// <summary>
    /// 涂布出库分配AGV取货点
    /// </summary>
    [WorkTitle(typeof(CoatingHandler), "涂布出库分配AGV取货点")]
    public class 涂布出库分配AGV取货点 : DeviceWork<StationDevice>
    {
        protected override void Do(StationDevice obj)
        {
            obj.EX(obj =>
            {
                if (!obj.Data2.Status.HasFlag(IstationStatus.光电状态)) throw new DoException("无光电");
                if (obj.Data3.Status.HasFlag(StationStatus.运行状态位)) throw new DoException("设备运行中");
                if (obj.Data.VoucherNo != obj.Data2.VoucherNo)
                    throw new WarnException($"等待任务[{obj.Data2.Tasknum}]执行--凭证号不一致[{obj.Data.VoucherNo}][{obj.Data2.VoucherNo}]");
                if (obj.Data2.Tasknum < 10000) throw new DoException("无任务");
                if (obj.Data2.Request != IstationRequest.请求分配目标地址) throw new WarnException("有任务无请求");

                DB.Do(db =>
                {
                    var task = db.Default.Set<WCS_TASK>().FirstOrDefault(v => v.TYPE == TaskType.出库 && v.SRMSTATION == obj.Entity.CODE && v.STATUS == WCS.Entity.TaskStatus.执行中);
                    if (task == null) throw new WarnException("WCS无该任务信息");
                    var addNext = "";
                    if (obj.Entity.CODE == "1340")
                    {
                        var Station1343 = Device.Find("1343").Create<StationDevice>();
                        addNext = "1343";
                        if (Station1343.Data2.Status.HasFlag(IstationStatus.光电状态) && Station1343.Data3.Status.HasFlag(StationStatus.运行状态位))
                            addNext = "1340";
                    }
                    else if (obj.Entity.CODE == "1341")
                    {
                        var Station1344 = Device.Find("1344").Create<StationDevice>();
                        addNext = "1344";
                        if (Station1344.Data2.Status.HasFlag(IstationStatus.光电状态) && Station1344.Data3.Status.HasFlag(StationStatus.运行状态位))
                            addNext = "1341";
                    }

                    //全部统一分配目标地址至
                    task.ADDRNEXT = addNext;
                    db.Default.SaveChanges();
                    task.CreateStatusLog(db, $"状态由[{WCS.Entity.TaskStatus.堆垛机完成}]变更为[{task.STATUS}]-{obj.Entity.Code}", this.GetType());
                    //开始写入目标地址
                    obj.Data.Tasknum = task.ID;
                    obj.Data.Goodsstart = obj.Entity.CODE.ToShort();
                    obj.Data.Goodsend = task.ADDRNEXT.ToShort();
                    obj.Data.CmdType = IstationCmdType.堆垛机放货完成请求目标地址;
                    obj.Data.VoucherNo++;
                });
            });
        }

        protected override bool SelectDevice(WCS_DEVICE dev)
        {
            return dev.CODE == "1340" || dev.CODE == "1341";
        }
    }

    /// <summary>
    /// 涂布叫料
    /// </summary>
    [WorkTitle(typeof(CoatingHandler), "涂布叫料")]
    public class 涂布叫料 : Work<StationDeviceGroup>
    {
        protected override void Do(StationDeviceGroup obj)
        {
            obj.EX(obj =>
             {
                 var station = obj.Entity.CODE;

                 #region 处理新增叫料任务

                 DB.Do(db =>
                 {
                     //找到所有的AGV任务
                     var agvTasks = db.Default.Set<WCS_AGVTask>().Where(v => v.TaskType == AGVTaskType.叫料)
                     .Where(v => v.Status < AGVTaskStatus.完成).ToArray();

                     foreach (var agvtask in agvTasks)
                     {
                         var position = agvtask.Position;
                         if (!ProtocolProxy.AllDatas.ContainsKey(position))
                             ProtocolProxy.AllDatas[position] = new ProdLineData();
                         var pld = ProtocolProxy.AllDatas[position] as ProdLineData;
                         pld.Frame = LogicHandler.Frame;
                         pld.Code = position;
                         pld.TaskList.Add(agvtask);

                         if (agvtask.Status == AGVTaskStatus.新建)
                         {
                             var qty = db.Default.Set<WCS_AGVTask>().Where(v => v.TaskType == AGVTaskType.叫料 && v.Status > AGVTaskStatus.新建 && v.Status < AGVTaskStatus.完成)
                            .Where(v => v.Position == agvtask.Position).Count();
                             //最多两个AGV任务
                             if (qty >= 2)
                             {
                                 throw new Exception($"{agvtask.Position}正在执行的叫料任务数量已达{qty},暂停出库");
                             }
                             //涂布叫料默认目标地址G1340，到达G1340后再决定是否要继续前进一步
                             var res = WMS.GetOutTask(agvtask.Position.Replace("_OUT", ""), "G1340");
                             res.ForEach(outTask =>
                             {
                                 var srm = Device.Find(outTask.TunnelNum).ROUTES.Where(v => v.NEXT.IsSC()).Select(v => v.NEXT).FirstOrDefault();

                                 var loc = string.Format("{0}-{1}-{2}", outTask.Row, outTask.Colomn, outTask.Layer);

                                 var task = new WCS_TASK
                                 {
                                     TYPE = TaskType.出库,
                                     STATUS = WCS.Entity.TaskStatus.新建,
                                     ADDRFROM = loc,
                                     ADDRTO = "G1340",
                                     BARCODE = outTask.ContainerBarCode,
                                     TUNNEL = outTask.TunnelNum,
                                     WMSTASK = int.Parse(outTask.WMSTaskNum),
                                     UPDATEUSER = "WCS",
                                     SRMSTATION = "",
                                     DEVICE = srm.CODE,
                                     //ADDRCURRENT = loc,
                                     AgvTask = agvtask.ID,
                                     Length = outTask.Length,
                                 };
                                 db.Default.Set<WCS_TASK>().Add(task);
                                 db.Default.SaveChanges();

                                 agvtask.Status = AGVTaskStatus.确认;
                                 agvtask.UpdateTime = DateTime.Now;
                                 db.Default.SaveChanges();
                             });
                         }
                         else if (agvtask.AGVStatus == AGVTaskStatus.完成)
                         {
                             agvtask.Status = agvtask.AGVStatus;
                             agvtask.UpdateTime = DateTime.Now;
                             db.Default.SaveChanges();
                         }
                         else if (agvtask.AGVStatus == AGVTaskStatus.取消)
                         {
                             agvtask.Status = agvtask.AGVStatus;
                             agvtask.UpdateTime = DateTime.Now;
                             db.Default.SaveChanges();
                         }
                     }
                 });

                 #endregion 处理新增叫料任务

                 //空闲自动，停止运行
                 if (obj.Items.Any(v => v.Data2.VoucherNo != v.Data.VoucherNo)) throw new WarnException("等待执行任务");
                 if (obj.Items.Any(v => !v.Data3.Status.HasFlag(StationStatus.自动))) return;
                 if (obj.Items.Any(v => v.Data3.Status.HasFlag(StationStatus.运行状态位))) throw new WarnException("设备运行中");
                 if (obj.Items.Any(v => !v.Data2.Status.HasFlag(IstationStatus.光电状态))) throw new DoException("没有光电");

                 var taskIds = new List<int>();
                 obj.Items.ToList().ForEach(dev => taskIds.Add(dev.Data2.Tasknum));
                 DB.Do(db =>
                 {
                     var taskList = db.Default.Set<WCS_TASK>().Where(v => taskIds.Contains(v.ID));
                     if (taskList == null) throw new WarnException($"WCS任务号{JsonConvert.SerializeObject(taskIds)}不存在");
                     if (taskList.Any(v => v.TYPE != TaskType.出库)) throw new WarnException("有任务的类型不是出库");
                     if (taskList.Any(v => v.AgvTask == 0)) throw new WarnException("人工出库任务,请手动搬走");
                     var agvtask = db.Default.Set<WCS_AGVTask>().Find(taskList.FirstOrDefault().AgvTask);
                     if (agvtask == null) throw new WarnException($"AGV任务号{taskList.FirstOrDefault().AgvTask}不存在");

                     if (agvtask.Status == AGVTaskStatus.确认)
                     {
                         var flag = db.Default.Set<WCS_AGVTask>().Where(v => v.TaskType == AGVTaskType.叫料)
                         .Where(v => v.Status > AGVTaskStatus.确认 && v.Status < AGVTaskStatus.取放完成).Count();
                         if (flag > 2) throw new Exception("有2未完成的AGV出库任务");

                         taskList.ToList().ForEach(task =>
                                 {
                                     task.STATUS = WCS.Entity.TaskStatus.已完成;
                                     task.UPDATETIME = DateTime.Now;
                                     task.ENDTIME = DateTime.Now;
                                 });

                         agvtask.Station = obj.Entity.CODE;
                         agvtask.Status = AGVTaskStatus.执行;
                         agvtask.UpdateTime = DateTime.Now;
                         db.Default.SaveChanges();
                     }
                     else if (agvtask.Status < agvtask.AGVStatus)
                     {
                         if (agvtask.AGVStatus == AGVTaskStatus.请求_允许)
                         {
                             if (agvtask.Status < AGVTaskStatus.执行) throw new WarnException($"AGV状态错误-{agvtask.Status}");
                             if (obj.Items.Any(v => v.Data2.Status.HasFlag(IstationStatus.AGV取货完成信号))) throw new WarnException("任务清零信号未清除");

                             agvtask.Status = agvtask.AGVStatus;
                             agvtask.UpdateTime = DateTime.Now;
                             db.Default.SaveChanges();
                         }
                         else if (agvtask.AGVStatus == AGVTaskStatus.取放完成)
                         {
                             if (obj.Items.Any(v => v.Data2.Status.HasFlag(IstationStatus.AGV取货完成信号))) throw new WarnException("任务清零信号未清除");
                             if (obj.Items.Any(v => !v.Data2.Status.HasFlag(IstationStatus.光电状态))) throw new WarnException("AGV取货完成后依然有光电信号");
                             if (agvtask.Status < AGVTaskStatus.请求_允许) throw new WarnException("AGV任务状态有误");

                             agvtask.Status = agvtask.AGVStatus;
                             agvtask.UpdateTime = DateTime.Now;
                             db.Default.SaveChanges();

                             foreach (var dev in obj.Items)
                             {
                                 dev.Data.Istation521Status = IstationStatus.AGV取货完成信号;
                             }
                         }
                     }
                 });
             });
        }

        protected override bool SelectDevice(WCS_DEVICE dev)
        {
            return dev.CODE == "G1340" || dev.CODE == "G1343";
        }
    }
}