using DBHelper;
using System;
using System.Collections.Generic;
using System.Linq;
using WCS.Core;
using WCS.Entity;
using WCS.Entity.Protocol;
using WCS.Entity.Protocol.RGV;
using WCS.Service.Helpers;
using WCS.Service.Log;

namespace WCS.Service.Extensions
{
    /// <summary>
    /// 输送机设备组
    /// </summary>
    public class StationDeviceGroup : DeviceGroup<IStation520, IStation521, IStation523>
    {
        /// <summary>
        /// 当前设备可用的RGV
        /// </summary>
        private static List<RGVDevice> AllRGVList;

        static StationDeviceGroup()
        {
            AllRGVList = Device.Where(v => v.IsRGV() && v.CODE != "RGV8").Select(v => v.Create<RGVDevice>()).ToList();
        }

        public StationDeviceGroup(WCS_DEVICE entity) : base(entity)
        {
        }

        /// <summary>
        /// 执行输送机设备组任务 单例锁
        /// </summary>
        /// <param name="act"></param>
        public void EX(Action<StationDeviceGroup> act)
        {
            try
            {
                if (ExDevice.Any(v => v == Entity.CODE)) throw new WarnException($"[{Entity.CODE}]--触发并发管控");
                OperateExDevice(Entity.CODE);
                act(this);
            }
            catch (DoException ex)
            {
                ex.DoExceptionEX(Entity);
            }
            catch (WarnException ex)
            {
                ex.WarnExceptionEX(Entity);
            }
            catch (Exception ex)
            {
                ex.ExceptionEx(Entity);
            }
            finally
            {
                OperateExDevice(Entity.CODE);
            }
        }

        /// <summary>
        /// 当前设备可用的RGV
        /// </summary>
        public List<RGVDevice> RgvList
        {
            get
            {
                return AllRGVList.Where(v => v.LocationList.Any(p => p.Entity == Entity)).ToList();
            }
        }

        /// <summary>
        /// 当前设备环穿组
        /// </summary>
        private List<StationLocation> LoncationList
        {
            get
            {
                var dev = StationLocation.ALLlocations.FirstOrDefault(v => v.Station == Entity.CODE);
                return StationLocation.ALLlocations.Where(v => v.PLC == dev.PLC).ToList();
            }
        }

        /// <summary>
        /// 设备组自身的位置
        /// </summary>
        public float Position
        {
            get
            {
                return StationLocation.ALLlocations.FirstOrDefault(v => v.Station == Entity.CODE).Location;
            }
        }

        /// <summary>
        /// 设备组所在环穿的总长度
        /// </summary>
        public float Length
        {
            get
            {
                return StationLocation.ALLlocations.FirstOrDefault(v => v.Station == Entity.CODE).Length;
            }
        }

        /// <summary>
        /// 设备组是否满足任务执行条件
        /// </summary>
        /// <param name="type">给当前设备组下发任务时需要的请求</param>
        /// <returns>true:不满足执行条件需要进行停止执行  false:表示满足条件不需要停止执行 </returns>
        /// <exception cref="Exception"></exception>
        public void WhetherToExecute(IstationRequest type = IstationRequest.无)
        {
            foreach (var item in Items)
            {
                if (item.Data.VoucherNo != item.Data2.VoucherNo) throw new WarnException($"等待{item.Entity.CODE}执行任务{item.Data.Tasknum},凭证号不一致");
                if (item.Data3.Status.HasFlag(StationStatus.运行状态位)) throw new DoException($"{item.Entity.CODE}运行中");
                if (!item.Data2.Status.HasFlag(IstationStatus.光电状态)) throw new DoException($"[{item.Entity.CODE}]无光电");
            }
        }

        /// <summary>
        /// 获取设备组中需要取货的设备
        /// </summary>
        /// <param name="obj"></param>
        /// <returns></returns>
        public List<Device<IStation520, IStation521, IStation523>> RGVGetTaskedDevice()
        {
            var a = Items.Where(v => v.Data2.Status.HasFlag(IstationStatus.光电状态) && v.Data2.Tasknum > 10000)
                        .Where(v => v.Entity.CODE.ToShort() != v.Data2.Goodsend && v.Data2.Goodsend != 0)
                        .ToList();
            return a.Count == 0 ? null : a;
        }

        /// <summary>
        /// 获取设备组中需要分配目标地址的设备
        /// </summary>
        /// <param name="obj"></param>
        /// <returns></returns>
        public List<Device<IStation520, IStation521, IStation523>> TaskedDeviceGetNextAddress()
        {
            var a = Items.Where(v => v.Data2.Status.HasFlag(IstationStatus.光电状态) && v.Data2.Tasknum > 10000)
                        .Where(v => v.Data2.Goodsend != 0)
                        .ToList();
            return a.Count == 0 ? null : a;
        }

        /// <summary>
        ///
        /// </summary>
        /// <returns></returns>
        public RGVDevice NextRGV()
        {
            return new RGVDevice(new WCS_DEVICE());
        }

        /// <summary>
        /// 计算目标RGV与站台自身的距离
        /// </summary>
        /// <param name="rgv"></param>
        /// <returns></returns>
        public float Distance(RGVDevice rgv)
        {
            return DevEX.Distance(Position, rgv.Position, Length);
        }

        /// <summary>
        /// 计算两个站台之间的距离
        /// </summary>
        /// <param name="rgv"></param>
        /// <returns></returns>
        public float Distance(StationDeviceGroup dev)
        {
            return DevEX.Distance(Position, dev.Position, Length);
        }

        /// <summary>
        /// 当前RGV
        /// </summary>
        /// <returns></returns>
        public RGVDevice CurrentRGV()
        {
            //RGV与站台距离误差为 正负50
            var max = Position + 500;
            var min = Position - 500;
            return RgvList?.FirstOrDefault(v => v.Data2.Position < max && v.Data2.Position > min);
        }

        /// <summary>
        /// 是否需要RGV
        /// </summary>
        /// <returns>true:需要RGV false:不需要RGV</returns>
        public bool NeedRgv()
        {
            var rgvs = Device.Where(v => v.IsRGV()).Select(v => v.Device<IRGV521>());
            var code = Entity.CODE.Replace("G", "").ToShort();
            if (rgvs.Any(v => v.Data.DestPosition_1 == code && v.Data.SystemStatus != RGVRunStatus.空闲))
                throw new WarnException("已有RGV执行中");
            foreach (var item in Items)
            {
                if (item.Data3.Status.HasFlag(StationStatus.运行状态位)) return false;
                if (!item.Data2.Status.HasFlag(IstationStatus.光电状态)) return false;
            }

            return true;
        }
    }

    /// <summary>
    /// 输送机设备
    /// </summary>
    public class StationDevice : Device<IStation520, IStation521, IStation523>
    {
        public StationDevice(WCS_DEVICE entity) : base(entity)
        {
        }

        /// <summary>
        /// 设备组是否满足任务执行条件
        /// </summary>
        /// <param name="type">给当前设备组下发任务时需要的请求</param>
        /// <returns>true:不满足执行条件需要进行停止执行  false:表示满足条件不需要停止执行 </returns>
        /// <exception cref="Exception"></exception>
        public void WhetherToExecute(IstationRequest type = IstationRequest.无)
        {
            //正在运行
            if (Data3.Status.HasFlag(StationStatus.运行状态位)) throw new DoException("运行中");
            //上一次的任务还未执行
            if (Data.VoucherNo != Data2.VoucherNo)
                throw new WarnException($"等待任务[{Data2.Tasknum}]执行");
            //没有光电
            if (!Data2.Status.HasFlag(IstationStatus.光电状态)) throw new DoException("无光电"); ;
            //没有任务号
            switch (type)
            {
                case IstationRequest.无:
                    if (Data2.Tasknum < 10000 && Data.Tasknum < 10000)
                        throw new WarnException($"设备无任务");
                    break;

                case IstationRequest.扫码入库:
                    if (Data2.Tasknum > 10000 && Data.Tasknum > 10000)
                        throw new WarnException($"设备已有任务任务");
                    break;

                case IstationRequest.堆垛机放货完成请求目标地址:
                    if (Data2.Tasknum < 10000 && Data.Tasknum < 10000)
                        throw new WarnException($"设备无任务信息");
                    break;

                case IstationRequest.请求分配目标地址:
                    if (Data2.Tasknum < 10000 && Data.Tasknum < 10000)
                        throw new WarnException($"设备无任务信息");
                    break;
            }
            //没有请求
            if (type != IstationRequest.无 && Data2.Request != type)
                throw new WarnException($"有光电无{type}请求");
        }

        /// <summary>
        /// 执行输送机任务 单例锁
        /// </summary>
        /// <param name="act"></param>
        public void EX(Action<StationDevice> act)
        {
            try
            {
                if (ExDevice.Any(v => v == Entity.CODE)) throw new WarnException($"[{Entity.CODE}]--触发并发管控");
                OperateExDevice(Entity.CODE);
                act(this);
            }
            catch (DoException ex)
            {
                ex.DoExceptionEX(Entity);
            }
            catch (WarnException ex)
            {
                ex.WarnExceptionEX(Entity);
            }
            catch (Exception ex)
            {
                ex.ExceptionEx(Entity);
            }
            finally
            {
                OperateExDevice(Entity.CODE);
            }
        }
    }

    /// <summary>
    /// RGV设备
    /// </summary>
    public class RGVDevice : Device<IRGV520, IRGV521, IRGV523>
    {
        static RGVDevice()
        {
            AllRGVList = Device.Where(v => v.IsRGV() && v.CODE != "RGV8").Select(v => v.Create<RGVDevice>()).ToList();
        }

        public RGVDevice(WCS_DEVICE entity) : base(entity)
        {
        }

        /// <summary>
        /// 所有环穿RGV
        /// </summary>
        private static List<RGVDevice> AllRGVList { get; set; }

        /// <summary>
        /// 与当前RGV处于同一环穿的RGV
        /// </summary>
        public List<RGVDevice> RGVList
        {
            get
            {
                return AllRGVList.Where(v => v.Entity.PROTOCOLS.Any(d => Entity.PROTOCOLS.Any(e => e.DB.PLC.IP == d.DB.PLC.IP)))
                    .Where(v => v.Entity.CODE != Entity.CODE).ToList();
            }
        }

        /// <summary>
        /// RGV当前位置
        /// </summary>
        public float Position
        {
            get
            {
                return Data2.Position;
            }
        }

        /// <summary>
        /// 与当前RGV处于同一环穿的站台
        /// </summary>
        public List<StationDeviceGroup> LocationList
        {
            get
            {
                return StationLocation.ALLlocations.Where(v => Entity.PROTOCOLS.Any(p => p.DB.PLC.CODE == v.PLC))
                                      .Select(v => Device.Find(v.Station).Create<StationDeviceGroup>()).ToList();
            }
        }

        /// <summary>
        /// 总长度
        /// </summary>
        public float Length
        {
            get
            {
                return LocationList.FirstOrDefault().Length;
            }
        }

        /// <summary>
        /// 执行RGV任务 单例锁
        /// </summary>
        /// <param name="act"></param>
        public void EX(Action<RGVDevice> act)
        {
            try
            {
                if (ExDevice.Any(v => v == Entity.CODE)) throw new WarnException($"[{Entity.CODE}]--触发并发管控");
                OperateExDevice(Entity.CODE);
                act(this);
            }
            catch (DoException ex)
            {
                ex.DoExceptionEX(Entity);
            }
            catch (WarnException ex)
            {
                ex.WarnExceptionEX(Entity);
            }
            catch (Exception ex)
            {
                ex.ExceptionEx(Entity);
            }
            finally
            {
                OperateExDevice(Entity.CODE);
            }
        }

        /// <summary>
        /// 获取前一个取货点
        /// </summary>
        /// <returns></returns>
        public StationDeviceGroup BeforeStation()
        {
            return LocationList.Where(v => v.Entity.Is(DF.涂布RGV取货设备组)).OrderBy(v => Distance(v)).FirstOrDefault();
        }

        /// <summary>
        /// 前一个RGV
        /// </summary>
        /// <returns></returns>
        public RGVDevice Before()
        {
            //按照位置排序
            var arr = RGVList.OrderBy(v => v.Position);
            var rgv = arr.FirstOrDefault(v => v.Position > Position);
            if (rgv == null)
                rgv = arr.LastOrDefault(v => v.Position < Position);
            return rgv;
        }

        /// <summary>
        /// 后一个RGV
        /// </summary>
        /// <returns></returns>
        public RGVDevice After()
        {
            //到当前RGV最近的一个RGV
            return RGVList.OrderBy(v => v.Distance(this)).FirstOrDefault();
        }

        /// <summary>
        /// 获取当前所在的取货站台
        /// </summary>
        /// <returns></returns>
        public StationDeviceGroup CurrentStation()
        {
            return LocationList.Where(v => v.Entity.Is(DF.涂布RGV取货设备组) || v.Entity.Is(DF.涂布RGV放货设备组)).Where(v =>
               {
                   //RGV与站台距离误差为 正负50500
                   var max = v.Position + 500;
                   var min = v.Position - 500;
                   return Data2.Position < max && Data2.Position > min;
               }).FirstOrDefault();
        }

        /// <summary>
        /// 计算当前RGV与指定RGV之间的距离
        /// </summary>
        /// <param name="rgv"></param>
        /// <returns></returns>
        public float Distance(RGVDevice rgv)
        {
            //return Math.Abs((Position - rgv.Position + Length) % Length);
            return DevEX.Distance(Position, rgv.Position, Length);
        }

        /// <summary>
        /// 计算当前RGV与指定R站台之间的距离
        /// </summary>
        /// <param name="after"></param>
        /// <returns></returns>
        public float Distance(StationDeviceGroup after)
        {
            return DevEX.Distance(Position, after.Position, Length);
        }

        /// <summary>
        /// 是否需要执行放货任务
        /// </summary>
        /// <returns></returns>
        public bool IsPut()
        {
            if (Data2.TaskType_1 != RGVTaskType.取货) return false;
            if (!Data2.Status_1.HasFlag(WCS.Entity.Protocol.RGVStatus.RGV到站)) return false;
            if (!Data2.Status_1.HasFlag(WCS.Entity.Protocol.RGVStatus.任务完成)) return false;
            if (!Data2.Status_1.HasFlag(WCS.Entity.Protocol.RGVStatus.光电)) return false;
            return true;
        }

        /// <summary>
        /// 写入移动任务
        /// </summary>
        /// <param name="addr">目标地址</param>
        public void Move(StationDeviceGroup addr)
        {
            if (Data2.WorkMode != RGVMode.自动) throw new WarnException($"RGV状态{Data2.WorkMode},无法执行移动任务");
            if (Data2.SystemStatus != RGVRunStatus.空闲) throw new WarnException($"rgv状态为{Data2.SystemStatus},无法执行移动任务");
            Data.TaskID_1 = addr.Entity.CODE.Replace("G", "").ToShort();
            Data.TaskType_1 = RGVTaskType.移动;
            Data.DestPosition_1 = addr.Entity.CODE.Replace("G", "").ToShort();
            Data.Trigger_1++;
        }

        /// <summary>
        /// 写入取货任务
        /// </summary>
        /// <param name="addr">目标地址</param>
        public void Pick(StationDeviceGroup addr, int task1 = 0, int task2 = 0)
        {
            Data.TaskType_1 = RGVTaskType.取货;
            Data.DestPosition_1 = addr.Entity.CODE.ToShort();
            if (task1 != 0) Data.TaskID_1 = task1;
            if (task2 != 0) Data.TaskID_2 = task2;
            Data.Trigger_1++;
        }

        /// <summary>
        /// 写入放货任务
        /// </summary>
        /// <param name="addr">目标地址</param>
        public void Put(StationDeviceGroup addr, int task1 = 0, int task2 = 0)
        {
            Data.TaskType_1 = RGVTaskType.放货;
            Data.DestPosition_1 = addr.Entity.CODE.Replace("G", "").ToShort();
            if (task1 != 0) Data.TaskID_1 = task1;
            if (task2 != 0) Data.TaskID_2 = task2;
            Data.Trigger_1++;
        }

        /// <summary>
        /// 筛选出所有与当前RGV距离小于指定长度的RGV
        /// </summary>
        /// <param name="distance">指定长度</param>
        /// <returns></returns>
        public RGVDevice[] RgvAfter(float distance)
        {
            return RGVList.Where(v => Distance(v) < distance).ToArray();
        }

        /// <summary>
        /// 当前RGV是否有拦住其他RGV
        /// </summary>
        /// <param name="rgv">RGV</param>
        /// <returns></returns>
        public bool StopedByMe(RGVDevice rgv)
        {
            //目标站台
            var target = rgv.Data2.DestPosition_1;
            //获取目标站台的设备组信息
            var station = Device.Find($"G{target}").Create<StationDeviceGroup>();

            //当前RGV与目标站台的距离小于传入RGV到达目标站台的距离
            return (this.Distance(station) < rgv.Distance(station)) || station.CurrentRGV()?.Entity.CODE == this.Entity.CODE;
        }

        /// <summary>
        /// 获取当前RGV的下一个站台,即距离最近的一个站台
        /// </summary>
        /// <returns></returns>
        public StationDeviceGroup NextStation()
        {
            //先取当前RGV与所有站台的距离
            var dev = LocationList.OrderBy(v => v.Distance(this)).FirstOrDefault();
            return dev;
        }
    }

    /// <summary>
    /// 堆垛机设备
    /// </summary>
    public class SRMDevice : Device<ISRM520, ISRM521, ISRM537>
    {
        public SRMDevice(WCS_DEVICE entity) : base(entity)
        {
        }

        /// <summary>
        /// 获取放货点
        /// </summary>
        public List<StationDevice> GetDeliveryPoint()
        {
            return Entity.ROUTES.Select(v => v.NEXT) //巷道
                                .SelectMany(v => v.ROUTES.Select(d => d.NEXT)) //放货点
                                .Where(v => v.IsConv()) //必须是输送线
                                .Select(v => v.Create<StationDevice>()).ToList();
        }

        /// <summary>
        /// 获取取货点
        /// </summary>
        public List<StationDevice> GetPickPoint()
        {
            return Device.Where(v => v.Is(DF.SRM二级品取货) || v.Is(DF.SRM涂布取货))
                         .Where(v => v.ROUTES.Any(p => p.NEXT.ROUTES.Any(d => d.NEXT == Entity)))
                         .Select(v => v.Create<StationDevice>())
                         .ToList();
        }

        /// <summary>
        /// 处理完成任务
        /// </summary>
        public void FinishedTaskHandle()
        {
            WCS_TASK task = new WCS_TASK();

            DB.Do(db =>
            {
                var taskIds = new List<int>() { Data2.FinishedTask_1, Data2.FinishedTask_2 }.ToArray();

                for (int i = 0; i < taskIds.Length; i++)
                {
                    //判断当前工位是否有完成任务
                    if (taskIds[i] == 0) continue;
                    //获取当前工位的目标地址
                    var ELine = i == 0 ? Data.ELine_1.ToString() : Data.ELine_2.ToString();
                    task = db.Default.Set<WCS_TASK>().Single(v => taskIds[i] == v.ID);
                    if (task.STATUS != TaskStatus.堆垛机执行 && task.STATUS != TaskStatus.堆垛机完成) continue;

                    if (task.STATUS == TaskStatus.堆垛机完成)
                    {
                        if (i == 0) Data.FinishedACK_1 = 1;
                        else Data.FinishedACK_2 = 1;
                        throw new DoException("二次处理堆垛机完成任务");
                    }

                    if (task.STATUS == TaskStatus.已完成)
                    {
                        if (i == 0) Data.FinishedACK_1 = 1;
                        else Data.FinishedACK_2 = 1;
                        throw new DoException("二次处理堆垛机完成任务");
                    }


                    if (task.TYPE == TaskType.入库)
                    {
                        task.ENDTIME = DateTime.Now;
                        task.STATUS = TaskStatus.已完成;
                        task.UPDATETIME = DateTime.Now;
                        db.Default.SaveChanges();
                    }
                    else if (task.TYPE == TaskType.出库)
                    {
                        task.STATUS = TaskStatus.堆垛机完成;
                        task.UPDATETIME = DateTime.Now;
                        db.Default.SaveChanges();
                        Uploader.Upload(db);
                    }
                    else if (task.TYPE == TaskType.移库)
                    {
                        if (task.STATUS == TaskStatus.堆垛机执行)
                        {
                            task.STATUS = TaskStatus.已完成;
                            task.UPDATETIME = DateTime.Now;
                            db.Default.SaveChanges();
                            Uploader.Upload(db);
                        }
                    }
                    else throw new Exception($"[{Entity.CODE}]任务类型错误");

                    task.CreateStatusLog(db, $"状态由[{TaskStatus.堆垛机执行}]变更为[{task.STATUS}]", this.GetType());
                }
            });

            DB.Do(db =>
            {
                var taskIds = new List<int>() { Data2.FinishedTask_1, Data2.FinishedTask_2 }.ToArray();

                for (int i = 0; i < taskIds.Length; i++)
                {
                    //判断当前工位是否有完成任务
                    if (taskIds[i] == 0) continue;
                    //获取当前工位的目标地址
                    var ELine = i == 0 ? Data.ELine_1.ToString() : Data.ELine_2.ToString();
                    task = db.Default.Set<WCS_TASK>().Single(v => taskIds[i] == v.ID);

                    if (task.TYPE == TaskType.入库 && task.STATUS == TaskStatus.已完成)
                    {
                        if (i == 0) Data.FinishedACK_1 = 1;
                        else Data.FinishedACK_2 = 1;
                    }
                    else if (task.TYPE == TaskType.出库 && task.STATUS == TaskStatus.堆垛机完成)
                    {
                        var target = Device.Find(ELine).Create<StationDevice>();
                        target.Data.Tasknum = task.ID;
                        target.Data.Goodsstart = ELine.ToShort();
                        target.Data.Goodsend = task.ADDRNEXT.ToShort();

                        if (i == 0) Data.FinishedACK_1 = 1;
                        else Data.FinishedACK_2 = 1;
                    }
                    else if (task.TYPE == TaskType.移库 && task.STATUS == TaskStatus.堆垛机完成)
                    {
                        if (i == 0) Data.FinishedACK_1 = 1;
                        else Data.FinishedACK_2 = 1;
                    }
                    else throw new Exception($"[{Entity.CODE}]任务类型错误");

                    task.CreateStatusLog(db, $"状态由[{TaskStatus.堆垛机执行}]变更为[{task.STATUS}]", this.GetType());
                }
            });
        }

        /// <summary>
        /// 执行堆垛机任务 单例锁
        /// </summary>
        /// <param name="act"></param>
        public void EX(Action<SRMDevice> act)
        {
            try
            {
                if (ExDevice.Any(v => v == Entity.CODE)) throw new WarnException($"[{Entity.CODE}]--触发并发管控");
                OperateExDevice(Entity.CODE);
                act(this);
            }
            catch (DoException ex)
            {
                ex.DoExceptionEX(Entity);
            }
            catch (WarnException ex)
            {
                ex.WarnExceptionEX(Entity);
            }
            catch (Exception ex)
            {
                ex.ExceptionEx(Entity);
            }
            finally
            {
                OperateExDevice(Entity.CODE);
            }
        }

        /// <summary>
        /// 执行出库任务 出库单例锁
        /// </summary>
        /// <param name="act"></param>
        public void EXOutStock(Action<SRMDevice> act)
        {
            try
            {
                var code = "";
                if (Entity.CODE == "SRM3" || Entity.CODE == "SRM4")
                {
                    code = "SRM3-SRM4-Out";
                    if (ExDevice.Any(v => v == code)) throw new WarnException($"触发出库并发管控--[{code}]");
                    OperateExDevice(code);
                }
                if (Entity.CODE == "SRM5" || Entity.CODE == "SRM6")
                {
                    code = "SRM5-SRM6-Out";
                    if (ExDevice.Any(v => v == code)) throw new WarnException($"触发出库并发管控--[{code}]");
                    OperateExDevice(code);
                }

                if (Entity.CODE == "SRM7" || Entity.CODE == "SRM8")
                {
                    code = "SRM7-SRM8-Out";
                    if (ExDevice.Any(v => v == code)) throw new WarnException($"触发出库并发管控--[{code}]");
                    OperateExDevice(code);
                }

                act(this);
            }
            finally
            {
                if (Entity.CODE == "SRM3" || Entity.CODE == "SRM4") OperateExDevice("SRM3-SRM4-Out");
                if (Entity.CODE == "SRM5" || Entity.CODE == "SRM6") OperateExDevice("SRM5-SRM6-Out");
                if (Entity.CODE == "SRM7" || Entity.CODE == "SRM8") OperateExDevice("SRM7-SRM8-Out");
            }
        }

        /// <summary>
        /// 一工位写任务
        /// </summary>
        /// <param name="task"></param>
        public void WriteTask1(Task task)
        {
            InfoLog.INFO_SRMINFO($"写入堆垛机[{Entity.CODE}]1工位-开始:[{Data.TaskID_1}][{Data.SLine_1}][{Data.SCol_1}][{Data.SLayer_1}][{Data.ELine_1}][{Data.VoucherNo_1}]");
            Data.TaskID_1 = task.ID;
            Data.SLine_1 = task.Line;
            Data.SCol_1 = task.Col;
            Data.SLayer_1 = task.Layer;
            Data.ELine_1 = task.SRMSTATION.ToShort();
            Data.ECol_1 = 0;
            Data.ELayer_1 = 0;
            Data.VoucherNo_1++;
            InfoLog.INFO_SRMINFO($"写入堆垛机[{Entity.CODE}]1工位-结束:[{Data.TaskID_1}][{Data.SLine_1}][{Data.SCol_1}][{Data.SLayer_1}][{Data.ELine_1}][{Data.VoucherNo_1}]");
        }

        /// <summary>
        /// 二工位写任务
        /// </summary>
        /// <param name="task"></param>
        public void WriteTask2(Task task)
        {
            InfoLog.INFO_SRMINFO($"写入堆垛机[{Entity.CODE}]2工位-开始:[{Data.TaskID_2}][{Data.SLine_2}][{Data.SCol_2}][{Data.SLayer_2}][{Data.ELine_2}][{Data.VoucherNo_2}]");
            Data.TaskID_2 = task.ID;
            Data.SLine_2 = task.Line;
            Data.SCol_2 = task.Col;
            Data.SLayer_2 = task.Layer;
            Data.ELine_2 = task.SRMSTATION.ToShort();
            Data.ECol_2 = 0;
            Data.ELayer_2 = 0;
            Data.VoucherNo_2++;
            InfoLog.INFO_SRMINFO($"写入堆垛机[{Entity.CODE}]2工位-结束:[{Data.TaskID_2}][{Data.SLine_2}][{Data.SCol_2}][{Data.SLayer_2}][{Data.ELine_2}][{Data.VoucherNo_2}]");
        }

        /// <summary>
        /// 获取任务对应的货叉
        /// </summary>
        /// <param name="task">任务信息</param>
        /// <param name="index">任务在下发任务集合中的索引</param>
        /// <returns></returns>
        public SrmFork GetFork(Task task, int index)
        {
            if (index > 1) throw new WarnException("一次最多下发两个任务");
            //如果索引是1，直接返回货叉2
            if (index == 1) return SrmFork.货叉2;

            //判断任务列是多少
            return task.Col switch
            {
                102 => Entity.CODE switch
                {
                    "SRM1" => SrmFork.货叉1,
                    _ => SrmFork.货叉2,
                },
                112 => SrmFork.货叉2,
                _ => SrmFork.货叉1,
            };
        }

        /// <summary>
        /// 检查同组堆垛机是否有出库任务正在执行
        /// </summary>
        public void CheckOutTask()
        {
            //检查同组堆垛机是否有正在执行出库任务的
            DB.Do(db =>
            {
                switch (Entity.CODE)
                {
                    case "SRM3":
                        if (db.Default.Set<WCS_TASK>().Any(v => v.STATUS == TaskStatus.堆垛机执行 && v.DEVICE == "SRM4" && v.TYPE == TaskType.出库))
                            throw new DoException("SRM4正在执行出库任务");
                        break;

                    case "SRM4":
                        if (db.Default.Set<WCS_TASK>().Any(v => v.STATUS == TaskStatus.堆垛机执行 && v.DEVICE == "SRM3" && v.TYPE == TaskType.出库))
                            throw new DoException("SRM3正在执行出库任务");
                        break;

                    case "SRM5":
                        if (db.Default.Set<WCS_TASK>().Any(v => v.STATUS == TaskStatus.堆垛机执行 && v.DEVICE == "SRM6" && v.TYPE == TaskType.出库))
                            throw new DoException("SRM6正在执行出库任务");
                        break;

                    case "SRM6":
                        if (db.Default.Set<WCS_TASK>().Any(v => v.STATUS == TaskStatus.堆垛机执行 && v.DEVICE == "SRM5" && v.TYPE == TaskType.出库))
                            throw new DoException("SRM5正在执行出库任务");
                        break;

                    case "SRM7":
                        if (db.Default.Set<WCS_TASK>().Any(v => v.STATUS == TaskStatus.堆垛机执行 && v.DEVICE == "SRM7" && v.TYPE == TaskType.出库))
                            throw new DoException("SRM7正在执行出库任务");
                        break;

                    case "SRM8":
                        if (db.Default.Set<WCS_TASK>().Any(v => v.STATUS == TaskStatus.堆垛机执行 && v.DEVICE == "SRM8" && v.TYPE == TaskType.出库))
                            throw new DoException("SRM8正在执行出库任务");
                        break;
                }
            });
        }
    }

    /// <summary>
    /// 异常处理
    /// </summary>
    public static class DevEX
    {
        /// <summary>
        /// 计算两点距离
        /// </summary>
        /// <param name="start">起始点</param>
        /// <param name="end">结束点</param>
        /// <param name="total">总长</param>
        /// <returns></returns>
        public static float Distance(float start, float end, float total)
        {
            float distance = 0;
            if (start > end) distance = (total - start) + end;
            else distance = end - start;
            return distance;
        }

        public static void DoExceptionEX(this DoException ex, WCS_DEVICE Entity)
        {
            InfoLog.INFO_INFO($"[{Entity.CODE}]--{ex.Message}");
        }

        /// <summary>
        /// 警报执行记录
        /// </summary>
        /// <param name="ex">警报信息</param>
        /// <param name="Entity">发生设备</param>
        /// <param name="reportMonitor">是否上报监控</param>
        /// <exception cref="Exception"></exception>
        public static void WarnExceptionEX(this WarnException ex, WCS_DEVICE Entity, bool reportMonitor = true)
        {
            InfoLog.INFO_WARN($"[{Entity.CODE}]--{ex.Message}");
            if (ex.Message.Contains("The database operation was expected")) return;

            LogHelper.AddWCS_EXCEPTION(ex.Message, Entity.CODE, WCS_EXCEPTIONTYPE.无.ToString());
            //排除部分频繁触发的异常上报
            if (ex.Message.Contains("触发并发管控")) return;

            if (reportMonitor)
            {
                Ltc.Log(ex.GetBaseException().Message);
                throw new Exception($"[{Entity.CODE}]--{ex.Message}");
            }
        }

        public static void ExceptionEx(this Exception ex, WCS_DEVICE Entity)
        {
            InfoLog.INFO_ERROR($"[{Entity.CODE}]--{ex.Message}");
            //排除部分频繁触发的异常上报
            if (ex.Message.Contains("Collection was modified; enumeration operation may not execute.")) return;
            Ltc.Log(ex.GetBaseException().Message);
        }
    }

    /// <summary>
    /// 堆垛机货叉/工位
    /// </summary>
    public enum SrmFork
    {
        货叉1 = 0,
        货叉2 = 1,
    }

    /// <summary>
    /// 站台位置信息
    /// </summary>
    public class StationLocation
    {
        /// <summary>
        /// 所有环穿站台的信息
        /// </summary>
        public static List<StationLocation> ALLlocations { get; set; } = new List<StationLocation>();

        static StationLocation()
        {
            ALLlocations.AddRange(new List<StationLocation>() {
                //new StationLocation("G1187",0,"RGV1",0),
                //new StationLocation("G1196",0,"RGV1",0),
                //new StationLocation("G1205",0,"RGV1",0),
                //new StationLocation("G1214",0,"RGV1",0),
                //new StationLocation("G1222",0,"RGV1",0),
                //new StationLocation("G1164",0,"RGV1",0),
                new StationLocation("G1",486326,"RGV3",1567770),
                new StationLocation("G2",693631,"RGV3",1567770),
                new StationLocation("G3",789931,"RGV3",1567770),
                new StationLocation("G4",961595,"RGV3",1567770),
                new StationLocation("G5",1013350,"RGV3",1567770),
                new StationLocation("G6",1069938,"RGV3",1567770),
                new StationLocation("G7",1126338,"RGV3",1567770),
                new StationLocation("G8",1178355,"RGV3",1567770),
                new StationLocation("G9",1256875,"RGV3",1567770),
                new StationLocation("G10",1313239,"RGV3",1567770),
                new StationLocation("G11",1369970,"RGV3",1567770),
            });
        }

        public StationLocation(string station, int location, string plc, int length)
        {
            Station = station;
            Location = location;
            PLC = plc;
            Length = length;
        }

        /// <summary>
        /// 输送机设备组编号
        /// </summary>
        public string Station { get; set; }

        /// <summary>
        /// 输送机在环轨中的位置
        /// </summary>
        public int Location { get; set; }

        /// <summary>
        /// 所属RGV组 PLC名称
        /// </summary>
        public string PLC { get; set; }

        /// <summary>
        /// 所属环穿轨道的长度
        /// </summary>
        public int Length { get; set; }
    }

    /// <summary>
    /// 巷道信息
    /// </summary>
    public class TunnelInfo
    {
        public WCS_DEVICE Tunnel;
        public WCS_DEVICE taskIN;
        public Device<ISRM520, ISRM521, ISRM537> SRM;
    }
}