WcsFramework/YWGC/FJK/WCS.Entity.Protocol/Station/StationEnum.cs

using System;
using System.ComponentModel;

namespace WCS.Entity.Protocol.Station
{
    /// <summary>
    /// 输送机模式
    /// </summary>
    public enum StationMode : short
    {
        /// <summary>
        /// 自动
        /// </summary>
        [Description("自动")]
        Automatic = 1,

        /// <summary>
        /// 手动
        /// </summary>
        [Description("手动")]
        Manual = 2,

        /// <summary>
        /// 维修
        /// </summary>
        [Description("维修")]
        Repair = 3,
    }

    ///// <summary>
    /////  指令类型
    ///// </summary>
    //public enum CmdType : short
    //{
    //    #region MyRegion

    //    /// <summary>
    //    ///  用于RGV使用，表示当前任务是WCS执行
    //    /// </summary>
    //    Task = 98,

    //    /// <summary>
    //    ///  用于RGV使用，表示当前任务是码垛信息执行
    //    /// </summary>
    //    palletizing = 99

    //    #endregion MyRegion
    //}

    /// <summary>
    /// 输送机警报
    /// </summary>
    [Flags]
    public enum StationAlarm : ushort
    {
    }

    /// <summary>
    /// 输送机状态
    /// </summary>
    [Flags]
    public enum StationStatus : ushort
    {
        /// <summary>
        /// 自动
        /// </summary>
        [Description("自动")]
        Auto = 1 << 0,

        /// <summary>
        /// 选中状态位
        /// </summary>
        [Description("选中状态位")]
        Choice_Bit = 1 << 1,

        /// <summary>
        /// 任务有货
        /// </summary>
        [Description("任务有货")]
        OT_Status = 1 << 2,

        /// <summary>
        /// 光电有货
        /// </summary>
        [Description("光电有货")]
        PH_Status = 1 << 3,

        /// <summary>
        /// 运行状态位
        /// </summary>
        [Description("运行状态位")]
        Run = 1 << 4,

        /// <summary>
        /// 正转
        /// </summary>
        [Description("正转")]
        Fwd_1 = 1 << 5,

        /// <summary>
        /// 反转
        /// </summary>
        [Description("反转")]
        Rev_1 = 1 << 6,

        /// <summary>
        /// 上升/右转/伸出（顶升移栽升降、拆码盘机升降、提升机升降、拆码盘机拨叉伸出）
        /// </summary>
        [Description("上升/右转/伸出（顶升移栽升降、拆码盘机升降、提升机升降、拆码盘机拨叉伸出）")]
        Up_Right_Front_2 = 1 << 7,

        /// <summary>
        /// 下降/左转/缩回（顶升移栽升降、拆码盘机升降、提升机升降、拆码盘机拨叉缩回）
        /// </summary>
        [Description("下降/左转/缩回（顶升移栽升降、拆码盘机升降、提升机升降、拆码盘机拨叉缩回）")]
        Down_Left_Back_2 = 1 << 8,

        /// <summary>
        /// 高位（顶升移栽升降、拆码盘机升降、提升机升降）
        /// </summary>
        [Description("高位（顶升移栽升降、拆码盘机升降、提升机升降）")]
        High_Station_2 = 1 << 9,

        /// <summary>
        /// 中位（拆码盘机升降）
        /// </summary>
        [Description("中位（拆码盘机升降）")]
        Mid_Station_2 = 1 << 10,

        /// <summary>
        /// 低位（顶升移栽升降、拆码盘机升降、提升机升降）
        /// </summary>
        [Description("低位（顶升移栽升降、拆码盘机升降、提升机升降）")]
        Low_Station_2 = 1 << 11,

        /// <summary>
        /// 前位（拆码盘机拨叉伸出）
        /// </summary>
        [Description("前位（拆码盘机拨叉伸出）")]
        Front_Station_2 = 1 << 12,

        /// <summary>
        /// 后位（拆码盘机拨叉缩回）
        /// </summary>
        [Description("后位（拆码盘机拨叉缩回）")]
        Back_Station_2 = 1 << 13,

        /// <summary>
        /// 手动入库
        /// </summary>
        [Description("手动入库")]
        ManualStorage = 1 << 14,

        /// <summary>
        /// 上位机未分配任务
        /// </summary>
        [Description("上位机未分配任务")]
        UnassignedTask = 1 << 15,
    }

    /// <summary>
    /// 输送机状态
    /// </summary>
    [Flags]
    public enum StationStatus1 : ushort
    {
        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        RES1 = 1 << 0,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        RES2 = 1 << 1,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        RES3 = 1 << 2,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        RES4 = 1 << 3,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        RES5 = 1 << 4,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        RES6 = 1 << 5,

        /// <summary>
        ///  备用
        /// </summary>
        [Description("备用")]
        RES7 = 1 << 6,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        RES8 = 1 << 7,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        RES9 = 1 << 8,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        RES10 = 1 << 9,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        RES11 = 1 << 10,

        /// <summary>
        ///  备用
        /// </summary>
        [Description("备用")]
        RES12 = 1 << 11,

        /// <summary>
        ///  备用
        /// </summary>
        [Description("备用")]
        RES13 = 1 << 12,

        /// <summary>
        ///  拆盘机光电
        /// </summary>
        [Description("拆盘机光电")]
        RES14 = 1 << 13,

        /// <summary>
        ///  是否锁定
        /// </summary>
        [Description("是否锁定")]
        RES15 = 1 << 14,

        /// <summary>
        ///  是否锁定
        /// </summary>
        [Description("备用")]
        IsLock = 1 << 15,
    }

    /// <summary>
    /// 外形故障
    /// </summary>
    [Flags]
    public enum StationShapeAlarm : ushort
    {
        /// <summary>
        /// 外形/条码等货物故障
        /// </summary>
        [Description("外形/条码等货物故障")]
        GoodsErr = 1 << 0,

        /// <summary>
        /// 前超长故障
        /// </summary>
        [Description("前超长故障")]
        FOutside = 1 << 1,

        /// <summary>
        /// 后超长故障
        /// </summary>
        [Description("后超长故障")]
        BOutside = 1 << 2,

        /// <summary>
        /// 左超宽故障
        /// </summary>
        [Description("左超宽故障")]
        LOutside = 1 << 3,

        /// <summary>
        /// 右超宽故障
        /// </summary>
        [Description("右超宽故障")]
        ROutside = 1 << 4,

        /// <summary>
        /// 超高故障
        /// </summary>
        [Description("超高故障")]
        HOutside = 1 << 5,

        /// <summary>
        /// 条码读取失败
        /// </summary>
        [Description("条码读取失败")]
        BcrNoread = 1 << 6,

        /// <summary>
        /// 超重
        /// </summary>
        [Description("超重")]
        Overload = 1 << 7,

        /// <summary>
        /// 货物严重外检故障
        /// </summary>
        [Description("货物严重外检故障")]
        GoodsErr1 = 1 << 8,

        /// <summary>
        /// 二维条码未读出
        /// </summary>
        [Description("二维条码未读出")]
        BcrNoread1 = 1 << 9,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        Res1 = 1 << 10,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        Res2 = 1 << 11,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        Res3 = 1 << 12,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        Res4 = 1 << 13,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        Res5 = 1 << 14,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        Res6 = 1 << 15,
    }

    /// <summary>
    ///  站台指令
    /// </summary>
    [Flags]
    public enum StationCmd : ushort
    {
        /// <summary>
        /// AGV放货通知
        /// </summary>
        [Description("备用")]
        Res = 1 << 0,

        /// <summary>
        /// AGV放货运行
        /// </summary>
        [Description("备用")]
        Res1 = 1 << 1,

        /// <summary>
        ///  AGV放货结束
        /// </summary>
        [Description("备用")]
        Res2 = 1 << 2,

        /// <summary>
        ///  AGV取货通知
        /// </summary>
        [Description("备用")]
        Res3 = 1 << 3,

        /// <summary>
        /// AGV取货运行
        /// </summary>
        [Description("备用")]
        Res4 = 1 << 4,

        /// <summary>
        /// AGV取货结束
        /// </summary>
        [Description("备用")]
        Res5 = 1 << 5,

        /// <summary>
        ///  翻转信号
        /// </summary>
        [Description("翻转信号")]
        Res6 = 1 << 6,

        /// <summary>
        ///   机械臂取货信号，此信号上位不写入，只由PLC写入
        /// </summary>
        [Description("备用")]
        Res7 = 1 << 7,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        Res8 = 1 << 8,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        Res9 = 1 << 9,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        Res10 = 1 << 10,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        Res11 = 1 << 11,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        Res12 = 1 << 12,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        Res13 = 1 << 13,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        Res14 = 1 << 14,

        /// <summary>
        /// 备用
        /// </summary>
        [Description("备用")]
        Res15 = 1 << 15,
    }

    /// <summary>
    ///  线体状态枚举
    /// </summary>
    public enum LineStatusEnum : short
    {
        /// <summary>
        ///  空闲
        /// </summary>
        [Description("空闲")]
        Idle = 1,

        /// <summary>
        ///  报警
        /// </summary>
        [Description("报警")]
        Alarm = 2,

        /// <summary>
        ///  手动
        /// </summary>
        [Description("手动")]
        Manual = 3
    }

    /// <summary>
    ///  线体正反转枚举
    /// </summary>
    public enum FwdOrRevEnum : short
    {
        /// <summary>
        ///  空闲
        /// </summary>
        [Description("空闲")]
        Idle = 1,

        /// <summary>
        ///  正转
        /// </summary>
        [Description("正转")]
        Fwd = 2,

        /// <summary>
        ///  反转
        /// </summary>
        [Description("反转")]
        Rev = 3
    }
}